MAX PVC Universal Pipe Boot

Elevate MAX PVC Universal Pipe  Flashing is specifically designed for the flashing of round penetrations and fits various penetrations from  1” (25 mm) to 6” (152.4 mm). The  Elevate PVC Universal Pipe Flashing must be cut to the correct size before installation.

MAX PVC Corner Curb Wrap

Elevate PVC Curb Wrap Corners are prefabricated flashings designed to reduce installation time and labor costs compared to traditional field-fabrication. Constructed from durable 60-mil reinforced  PVC membrane.

Sizes Available:

• 7”, 13”, 19”, 25”, 31”, 37”

Max PVC Square Tube Wrap

PVC tube wraps feature an integrated overlap to easily encase square or rectangular tubing for a secure,  solid weld. They streamline the installation process by eliminating complex field-fabrication while ensuring a professional,  watertight finish.

Sizes Available:

• 4” x 4” x 8” (101.6 mm x 101.6 mm x 203.2 mm)
• 6” x 6” x 8” (152.4 mm x 152.4 mm x 203.2 mm)

MAX PVC Inside/Outside Corners

Molded from reinforced PVC, MAX PVC inside / outside corners are universally  designed for flashing both inside and  outside corners on curbs, parapets,  and scuppers.

Elevate PVC Unsupported Flashing

Elevate PVC Unsupported Flashing is a non-reinforced PVC membrane made with DuPont Elvaloy® KEE, used in roofing applications where Elevate preformed PVC  accessory products are not appropriate.

Sizes Available:

• 24” x 50’ Roll (610 mm x 15.2 m)

MAX PVC Reinforced Membrane Flashing

Elevate MAX PVC reinforced membrane flashing is a flexible PVC sheet with polyester weft-inserted reinforcement.  It meets ASTM D 4434 Type III standards and is heat-weldable for low-slope applications. May be adhered, fastened,  or induction welded to substrates.

Sizes Available:

• 8” X 100’ Roll (203.2 mm x 30.5 m)

MAX PVC T-Joint Cover

Unsupported PVC T-Joint Covers are flexible, circular patches designed to  reinforce seam intersections where  three layers of membrane meet.  Lacking an internal fabric mesh,  they are highly malleable and  conform easily to the uneven  step-off at T-joints.

Sizes Available:

• 4” (101.6 mm)

MAX PVC Split Pipe Boot

Elevate MAX PVC Split Pipe Boots are factory-fabricated flashings made from PVC. The split boot is specifically designed for flashing round penetrations.

Sizes Available:

• 1” - 3” (25.4 mm – 76.2 mm)
• 3” - 6” (76.2 mm – 152.4 mm)
• 6” - 9” (152.4 mm – 228.6 mm)
• 9” - 11” (228.6 mm – 279.4 mm)

PVC Walkway Pad Roll

A reinforced PVC walkway pad  roll designed to protect roofing  membranes in high-traffic areas.  The textured surface provides slip resistance, while the smooth bottom  allows for secure heat-welded  installation to PVC roof systems. 

Sizes Available:

• 2.5’ x 60’ Roll (762 mm x 18.3 m)

MAX PVC Safety Strip

Elevate MAX PVC yellow safety stripping is a bright yellow PVC  membrane strip used to mark safety warning lines on roofs.  Constructed with laminated  PVC film and weft-inserted polyester reinforcement.

Sizes Available:

• 6” x 100’ (152.4 mm x 30.48 m)

Twin Jet

Twin Jet is a two-component, low-rise polyurethane adhesive applied in bead pattern for the attachment of Elevate-approved roof insulations. It may also be used in bead or spatter pattern for the attachment of Elevate PVC XR, PVC KEE XR and MAX PVC XR membranes to acceptable horizontal substrates, per Elevate specifications. Twin Jet is packaged in portable pressurized canisters, allowing extrusion of Part 1 and Part 2 to the gun and mix tip assembly.

Twin Jet Y 

Twin Jet is the industry’s first* FM-Approved spatter pattern adhesive in canisters for board-to-board applications! Twin Jet Y is a superior low-rise polyurethane adhesive that can be applied in bead or spatter pattern for the attachment of Elevate-approved roof insulations. It may also be used in bead or spatter pattern for the attachment of Elevate PVC XR, PVC KEE XR and MAX PVC XR membranes to acceptable horizontal substrates, per Elevate specifications. Twin Jet Y is packaged in portable pressurized canisters, allowing extrusion of Part A and Part B to the gun and mix tip assembly.

^{_{*Based on publicly available data as of November 2024.}}

Jet Bond PVC

Elevate Jet Bond PVC is a Low VOC sprayable bonding adhesive designed for portability and ease of-use. It’s a versatile product that requires minimal flash off time. Jet Bond PVC adheres standard Elevate PVC and MAX PVC (non-fleece) membranes to multiple substrates. Jet Bond PVC is not approved for use with Elevate PVC KEE membranes. It’s perfect for contractors who are looking for a more convenient alternative to traditional roll-on applications. 

MAX PVC Clad Metal

Elevate MAX PVC clad metal is a sheet of 24-gauge, G90 galvanized steel laminated with a 17-mil PVC film.  The PVC surface allows for hot-air welding to MAX PVC membranes when incorporated into roof details. 

Sizes Available:

• 4’ x 10’ (1.2 m x 3.05 m)4’ x 10’ (1.2 m x 3.05 m)

MAX PVC Vinyl Rib

Elevate MAX PVC vinyl ribs are designed to simulate the look of a standing seam metal roof.   Installed after the roofing system,   ribs provide a durable and attractive alternative to metal panels. Each rib is extruded PVC. Sections may be joined as needed.

Sizes Available:

• 1.375” (34.93 mm) base width,   1” (25.4 mm) tall, 10’ (3.05 m) lengths

MAX PVC Penetration Pocket

A durable, pre-formed PVC penetration pocket designed to simplify flashing  around irregular roof penetrations.  Its flexible design accommodates  any penetration length between  6” and 12” with a consistent 6”  width,  providing an adaptable fit  for a wide range of penetration sizes.

Sizes Available:

• 6” x 6” - 12” (152.4 mm x 152.4 mm - 300 mm) Fits penetrations up to 3.5” (90 mm) in diameter.