UltraFlash One-Part Liquid Flashing

UltraFlash One-Part Liquid Flashing is a one-component polyurethane / bitumen waterproofing resin. It is ideal for roof flashings and details where the application of waterproofing membranes is challenging.

Sizes Available:

• 2x 1 Gallons (3.78 L) Pails

• 5 Gallon (18.9 L) Pail

Multi-Purpose MB Flashing Cement

Elevate Multi-Purpose MB Flashing Cement may be used to adhere Elevate sand-backed base sheets, Elevate SBS cap sheets and APP Cool cap sheets. Elevate Multi-Purpose MB Flashing Cement can be used as a lap adhesive in two-ply SBS systems.

Sizes Available:

• 4.75 Gallon (17 L) Pail

UltraFlash Fabric

Used with UltraFlash Liquid Flashing, UltraFlash™ Fabric is a stitch-bonded polyester scrim that provides a sturdy combination of burst strength and toughness for roofing applications.

Sizes Available:

• 6” x 100 yd (152.4 mm x 91.4 m)

• 12” x 100 yd (304.8 mm x 91.4 m)

• 24” x 100 yd (609.6 mm x 91.4 m)

• 40” x 108 yd (1.02 m x 98.8 m)

AC FAST FR

Elevate AC FAST FR is part of a multi-component, quick-curing, UV-stable, high-performance, cold liquid-applied Polymethyl Methacrylate (PMMA) roofing and waterproofing system, and is suitable for roof flashings and full system applications on SBS roofs. Do NOT apply to APP, TPO, PVC, or EPDM.

Colors Available:

• White

• Gray

Sizes Available:

• 3.96 Gallon (15 L)

SA Primer

SA Primer is designed to prime substrates prior to the application of BASEGARD™ SA membrane where required by Elevate Technical Specifications and Details. SA Primer must be applied with a solvent-resistant roller.

Sizes Available:

• 5 Gallon (18.9 L) Pail

Channel Venting Base

Channel Venting Base is designed to be mechanically fastened over lightweight concrete roof decks or other surfaces a a base for Elevate roofing systems. The top sanded surface is suitable for installation of additional plies using hot asphalt, Elevate MB Cold Adhesive, or a roofing torch, and is also suitable for the installation of Elevate insulation in foam adhesive. 

Sizes Available:

• 3’ 3” x 32’ 11” (1 m x 10 m)

SEBS Mopping Asphalt

Elevate SEBS Mopping Asphalt is modified with SEBS (styreneethylene-butadiene-styrene) block copolymer to make it a premium choice for hot-mopped roof membrane applications. It is intended for use in Elevate Built-up Roofing systems as the primary waterproofing and as an interply adhesive. 

Sizes Available:

• 50 lbs (22.7 kg) Keg

Multi-Purpose MB Cold Adhesive

Elevate Multi-Purpose MB Cold Adhesive consists of an asphalt matrix with non-asbestos fibers and performance additives designed to meet adhesion characteristics necessary for horizontal applications of select Elevate Base Sheets, Cap Sheets, and as a lap adhesive in two-ply SBS Systems.

Sizes Available:

• 4.75 Gallon (18 L) Pail

• 55 Gallon (208 L) Drum

• 275 Gallon (1,041 L) Tote

Ceramic Coated Roofing Granules

Roofing granules that are applied to areas of asphalt “bleed-out” while the asphalt is still in a molten state.

Sizes Available:

• 50 lbs (22.7 kg) Pails (Black and White) 

• 40 lbs (18.1 kg) Pails (UltraWhite)

Smog Reducing Granules

3M™ Smog Reducing granules are photocatalytic-ceramic coated granules that help clean the air of emission pollutants. Available in white and grey.

Sizes Available:

• 50 lbs (22.7 kg) Pails

Acrylitop PC-100

AcryliTopTM PC-100 Roof Coating is a high-solids acrylic roof coating that provides a reflective surface over new Elevate APP, SBS, or RubberGardTM EPDM roofing systems. It may also be applied to existing Elevate asphalt or EPDM roofing systems to reduce roof surface temperature and help to extend roof service life. Application only requires one coat, eliminating the need for a base coat or primer, saving material and labor costs.