Elevate offers a range of Anchor Products attachment solutions designed to support common rooftop applications across compatible single-ply membrane roofing systems. Available products include the 2400 Series and 3400 Series U-Anchors, Guy Wire Kits, and Tie-Down Kits for securing equipment, supports, and other building components.
See the applicable Anchor Products documentation below for installation requirements and product compatibility.
The U-Anchor 2000 Series are lightweight rooftop attachment systems consisting of a U-Anchor 2000 Series plate and cover membrane. The cover membrane is factory sealed to the top of the plate. The anchor provides a positive, watertight, manufacturer accepted attachment for mechanically attached and adhered TPO, PVC and EPDM single-ply membranes.
The U-Anchor 3000 Series are lightweight rooftop attachment systems consisting of a U-Anchor 3000 Series plate and cover membrane. The cover membrane is factory sealed to the top of the plate. The anchor provides a positive, watertight, manufacturer accepted attachment for mechanically attached and adhered TPO, PVC and EPDM single-ply membranes.
Anchor Products Guy Wire Tie-Down Kits and Tie-Down Kits help support common rooftop securement needs for compatible equipment and accessories. Use and installation should follow current Anchor Products documentation and project requirements.
The Tie-Down Kit provides reliable rooftop unit securement to help protect against wind, seismic events, and extreme weather. Using Anchor Products' U-Anchor™ 2000 Series Attachments, the system attaches to compatible single-ply, asphalt, and coated roofs without damaging the roof surface or voiding roof warranties. Each kit includes U-Anchors, stainless steel aircraft cable, brackets, and hardware for long-term durability. The system delivers holding strength up to 3,000 lbs. in tension and 4,000 lbs. in shear, with corrosion-resistant components designed for lasting performance.
The Guy Wire Kit is designed to prevent rooftop equipment from shifting, lifting, or causing damage during high winds or seismic events. Using the proven U-Anchor™ 2000 Series attachment, this kit provides unmatched strength and stability while keeping your roof watertight and under warranty.
| Product | Membrane Type | Color | Rating |
|---|---|---|---|
| 2400 Series U-Anchor | TPO | White, Gray, Tan | Shear: 2500 lbf Tensile: 1740 lbf |
| PVC | White, Charcoal, Gray, Tan | ||
| EPDM | Black | ||
| 3400 Series U-Anchor | TPO | White, Gray, Tan | Shear: 3140 lbf Tensile: 2700 lbf |
| PVC | White, Charcoal, Gray, Tan | ||
| EPDM | Black | ||
| Tie-Down Kit | N/A | N/A | Shear: 4000 lbf Tensile: 3000 lbf |
| Guy Wire Kit | N/A | N/A | Breaking Strength: 3700 lbs |
Anchor Products 2400 Series and 3400 Series U-Anchors are rooftop attachment products used to help secure compatible rooftop equipment and accessories. These products are manufactured by Anchor Products and should be selected and installed according to current Anchor Products documentation, project specifications, and applicable roof system requirements.
The Anchor Products 2400 Series U-Anchor is commonly used as a rooftop attachment point for compatible rooftop accessories and equipment. Suitability depends on the roof assembly, deck type, project conditions, and applicable installation requirements.
The Anchor Products 3400 Series U-Anchor is commonly used for rooftop attachment applications where a larger or heavier-duty attachment solution may be needed. Suitability should be confirmed based on the specific roof assembly, equipment, project conditions, and current Anchor Products documentation.
The Anchor Products Guy Wire Tie-Down Kit is used to help secure compatible rooftop items that require guy wire support. Product use and layout should be determined by the project requirements and current manufacturer instructions.
The Anchor Products Tie-Down Kit is used to help secure compatible roof-mounted equipment or accessories. The correct product, layout, and attachment method should be based on the roof system, project conditions, and current Anchor Products documentation.
No single rooftop attachment product is suitable for every roof system or project condition. Compatibility should be confirmed based on the roof membrane, roof assembly, deck type, equipment being secured, and current manufacturer requirements.
Product selection, anchor placement, fastener requirements, and layout should be determined by the project team, installer, design professional, or other qualified party responsible for the specific project.
Your response helps us make our online experience better to provide content that is specific to your role.
Thank you. Your response helps us make our online experience better to provide content that is specific to your role.
